Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Brake Disc of a Fiat Stilo

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Bearing

How to remove the front brake disc of a Fiat Stilo. Position your car on a column lift (jack), raising it to a comfortable height for working. Unscrew the bolts with a socket wrench or air drill and remove the wheel. Next, start unscrewing the bolts of the brake caliper, detaching it from the bracket. Use a screwdriver to detach the brake pads and then remove the brake disc (unscrew the Torx bolts). Fit the new brake disc with all the associated bolts, tighten the caliper bracket to the disc, then refit the brake caliper, ensuring all bolts are tightened properly. Before fitting the wheel, bleed the brake caliper if necessary. Finally, fit the wheel with the bolts.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Stilo (2001-2010 / MK 1) Let's see how to remove the front brake disc on a Fiat Stilo. Position the car on a column lift and raise it to a comfortable height for work. Unscre…
Fiat Stilo (2001-2010 / MK 1) Intervene on the removal of a rear brake disc on a Fiat Stilo. After positioning the car on a column lift, loosen the nuts with a telescopic spanner …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos