Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Brake Disc on a Fiat Stilo

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Brake rotors

Intervene on the removal of a rear brake disc on a Fiat Stilo. After positioning the car on a column lift, loosen the nuts with a telescopic spanner and lift to a comfortable height. Unscrew the nuts and remove the wheel. Then, start unscrewing the caliper bolts to detach it from the bracket. Use a screwdriver to detach the brake pads. Now remove the caliper bracket and unscrew the bolts on the brake disc. Pull the disc towards you to slide it off the hub. Clean all dirt and debris from the removed parts with brushes. Before reassembly, lubricate the parts as shown in the video.

Updated on 5 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Fiat Stilo (2001-2010 / MK 1) Let's see how to remove the front brake disc on a Fiat Stilo. Position the car on a column lift and raise it to a comfortable height for work. Unscre…
Fiat Stilo (2001-2010 / MK 1) How to remove the front brake disc of a Fiat Stilo. Position your car on a column lift (jack), raising it to a comfortable height for working. Unscre…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos