Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the external door handle of the Fiat Cinquecento

Model: Fiat Cinquecento MK 1 - Years 1991-1998
Part: Handle

Today we will see the instructions that will allow us to disassemble and replace the external handle of the front door of the Fiat Cinquecento. First, we open the front door of the car and start unscrewing the side screws of the handle and the lock; then we lever on the sides of the handle to detach and remove it, disconnecting the lock cylinder cable, as shown in the video. At this point, we proceed with the replacement of the handle, removing the cylinder from it; then we reassemble the handle and the lock on the door, fixing it correctly!

Posted on 5 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Fiat Cinquecento?
How to Remove the Door Panel of a Fiat Cinquecento?
Fiat Cinquecento (1991-1998 / MK 1) To remove the door panel of a Fiat Cinquecento, first unscrew the screws that secure the internal handle cover and those that secure the armrest loca…
Removing the External Wing Mirror of the Fiat Cinquecento
Removing the External Wing Mirror of the Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) In this guide, we will see the steps to remove and replace the external wing mirror of the Fiat Cinquecento, following the instructions below. First,…
How to Remove the Instrument Cluster in a Fiat Cinquecento
How to Remove the Instrument Cluster in a Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) How to remove the instrument cluster in a Fiat Cinquecento? Follow these steps for proper removal. Remove the plastic cover (trim) of the instrument …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos