Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster in a Fiat Cinquecento

Model: Fiat Cinquecento MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
Part: Instrument cluster

Video tutorial

How to remove the instrument cluster in a Fiat Cinquecento? Follow these steps for proper removal. Remove the plastic cover (trim) of the instrument cluster, detach it from the dashboard, then unscrew the securing screws located at the sides of the instrument cluster with a screwdriver.

Remove the instrument cluster from the dashboard (disconnect the power cable). Once the piece is removed, fit a new one or replace the LEDs/bulbs in the cluster and refit it. Finally, proceed to mount the piece following the previous steps.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Fiat Cinquecento?
How to Remove the Door Panel of a Fiat Cinquecento?
Fiat Cinquecento (1991-1998 / MK 1) To remove the door panel of a Fiat Cinquecento, first unscrew the screws that secure the internal handle cover and those that secure the armrest loca…
How to Remove the Air Vent of a Fiat Cinquecento
How to Remove the Air Vent of a Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) Learn how to remove the air vents (central dashboard) of a Fiat Cinquecento. Use levers to remove the vents and a screwdriver. Unscrew the securing s…
Removing the External Wing Mirror of the Fiat Cinquecento
Removing the External Wing Mirror of the Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) In this guide, we will see the steps to remove and replace the external wing mirror of the Fiat Cinquecento, following the instructions below. First,…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos