Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Vent of a Fiat Cinquecento

Model: Fiat Cinquecento MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
Part: Air vents

Video tutorial

Learn how to remove the air vents (central dashboard) of a Fiat Cinquecento. Use levers to remove the vents and a screwdriver.

Unscrew the securing screws located on the sides of the central vent; lever at the top and bottom with the levers, detach the air vents and pull them out from the dashboard. Once you have pulled the vents outwards: disconnect the power connectors (if present) and remove the piece.

Prepare to perform maintenance inside the dashboard and then start fitting the new air vents; connect the connectors and secure everything.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

Removing the External Wing Mirror of the Fiat Cinquecento
Removing the External Wing Mirror of the Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) In this guide, we will see the steps to remove and replace the external wing mirror of the Fiat Cinquecento, following the instructions below. First,…
How to Remove the Instrument Cluster in a Fiat Cinquecento
How to Remove the Instrument Cluster in a Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) How to remove the instrument cluster in a Fiat Cinquecento? Follow these steps for proper removal. Remove the plastic cover (trim) of the instrument …
How to replace the external door handle of the Fiat Cinquecento
How to replace the external door handle of the Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the external handle of the front door of the Fiat Cinquecento. First…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos