Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the External Wing Mirror of the Fiat Cinquecento

Model: Fiat Cinquecento MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
Part: Side mirror

Video tutorial

In this guide, we will see the steps to remove and replace the external wing mirror of the Fiat Cinquecento, following the instructions below. First, open the front door and start by removing the plastic cover behind the mirror; then undo the three fixing screws to remove it from the outside, as shown in the video.

At this point, replace the entire wing mirror with the new one, then refit everything, applying the reverse procedure of disassembly!


Updated on 12 May 2026 by ScegliAuto


Related tutorials

How to replace the external door handle of the Fiat Cinquecento
How to replace the external door handle of the Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the external handle of the front door of the Fiat Cinquecento. First…
How to Remove the Instrument Cluster in a Fiat Cinquecento
How to Remove the Instrument Cluster in a Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) How to remove the instrument cluster in a Fiat Cinquecento? Follow these steps for proper removal. Remove the plastic cover (trim) of the instrument …
How to Remove the Centre Tunnel of a Fiat Cinquecento
How to Remove the Centre Tunnel of a Fiat Cinquecento
Fiat Cinquecento (1991-1998 / MK 1) How to remove the centre tunnel of a Fiat Cinquecento? Start by removing the securing pins of the trim located at the bottom of the gear knob using a…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos