Do it yourself
Frequently asked questions about cars and motorcycles

How is the tire pressure reset done in the 2024 Fiat?

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tire pressure warning light

See other generations:
Video tutorial

The tire inflation pressure, as is known, plays a very important role, as the safety of the vehicle depends on it, so it cannot be neglected. If the anomaly light is on, we probably have a deflated tire or maybe a puncture, which forces us to intervene as soon as possible, restoring the pressure to the value specified by the manufacturer and shown on the adhesive label printed on the passenger side door pillar.

With the values back to normal, we connect an electronic fault finding device to the vehicle's Obd socket and reset the alarm.


Posted on 12 November 2025 by ScegliAuto


Related tutorials

Fiat Ducato (2014-2026 / X290) Today, you will learn how to check the tyre pressure and reset the TPMS light on a Fiat Ducato vehicle. To check the tyre pressure, it is essential t…
Fiat Ducato (2014-2026 / X290) To reset the Service light on the Fiat Ducato, there is no procedure that can be performed using the controls on the instrument panel: you will need …
Fiat Ducato (2014-2026 / X290) Inside the Fiat Ducato, reset the service light by holding down the accelerator pedal while the instrument panel is off. At this point, turn the key …

    Frequently Asked Questions

    • Ducato 2014-2026 - How do you reset the tire pressure warning light on the Fiat Ducato? Read answer

Where is the Battery Located in a Toyota RAV4 Hybrid?

In this video, see where the battery is located in a Toyota RAV4 Hybrid, useful in case you need to replace it or perform an emergency start. As shown, it is positioned at the rear of the vehicle, specifically at the base of the right wall of the boot. To access it, first remove the floor panel, then disassemble the right drawer and subsequently the small glove compartment. To remove it, simply unscrew the two bolts of the upper bracket and disconnect both terminals, always starting with the negative.

Watch the video!


by ScegliAuto

More videos