Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Fiat Ducato?

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on the Fiat Ducato, there is no procedure that can be performed using the controls on the instrument panel: you will need to use a diagnostic tool. This must be connected to the OBD port of the vehicle, located at the bottom left of the steering column.

Once the scanner is connected, select the vehicle model and its corresponding version. Then proceed with the reset by following all the instructions shown in the tutorial; finally, disconnect the scanner, ensuring that the reset has been completed correctly.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

Reset the Service Light on a Fiat Ducato
Reset the Service Light on a Fiat Ducato
Fiat Ducato (1981-1993 / MK 1) Hello! Today, you will learn how to reset the service light on a Fiat Ducato. Remember, this step should only be performed after completing the servi…
How to Reset the Service Light on a Fiat Ducato
How to Reset the Service Light on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) When the service light shaped like a spanner illuminates on a Fiat Ducato, it is necessary to perform a service. The service includes replacing fluid…
Reset Service Light on Fiat Ducato
Reset Service Light on Fiat Ducato
Fiat Ducato (2002-2006 / ) In today's video tutorial, you will learn how to reset the service light for routine maintenance on a Fiat Ducato. First, get inside the vehicle and …

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos