Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Fiat Cronos

Model: Fiat Cronos 358s, X6S - Years 2018-2026
Part: Battery

Today we will explain how to replace the battery of the Fiat Cronos. To replace the battery, we need to open the front hood and unscrew the battery locking nut using a 13mm key. After removing the lock and the safety belt, disconnect the negative connector using a 10mm insert key and immediately after the positive connector. Then we remove the battery and insert a new one in its place; tighten the positive connector nut and then the negative connector nut. Reassemble the locking nut and after inserting the belt, close the front hood.

Posted on 17 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Fiat Cronos
How to reset the service light on the Fiat Cronos
Fiat Cronos (2018-2026 / 358s, X6S) The steps to reset the service light of the Fiat Cronos can only be performed using a PC for diagnostics connected to the vehicle. With the instrumen…
How to Replace the Key/Remote Battery for the Fiat Cronos
How to Replace the Key/Remote Battery for the Fiat Cronos
Fiat Cronos (2018-2026 / 358s, X6S) The tutorial video we are about to observe is applicable to multiple cars, including the Fiat Cronos, Fiat Argo, etc. It is quite easy to realize tha…
Change the Key Fob Battery on a Fiat Cronos
Change the Key Fob Battery on a Fiat Cronos
Fiat Cronos (2018-2026 / 358s, X6S) The battery inside the key fob that opens and closes the doors of the Fiat Cronos will eventually run out, and you need to replace it. To do this, sn…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos