Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Fiat Cronos?

Model: Fiat Cronos 358s, X6S - Years 2018-2026
Part: Cabin air filter

In this tutorial we can see how to replace the cabin filter in the Fiat Cronos, an extremely simple and quick operation. First of all, we position ourselves on the passenger seat, then we go under the dashboard and locate the long rectangular door located in the joint between the central tunnel and the dashboard itself. We then unscrew the single fixing screw, open the door and remove the old filter. At this point, all that remains is to clean the housing from any possible dirt residue, insert the replacement and reassemble everything following the reverse procedure.

Posted on 6 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Dome Light Bulb of the Fiat Cronos
How to Replace the Cabin Dome Light Bulb of the Fiat Cronos
Fiat Cronos (2018-2026 / 358s, X6S) This guide explains how to remove and replace the interior bulb of the cabin dome light of the Fiat Cronos, following the instructions below. First, …
How to Replace the Air Filter in a Fiat Cronos
How to Replace the Air Filter in a Fiat Cronos
Fiat Cronos (2018-2026 / 358s, X6S) In this video tutorial, you will see how to replace the air filter in a Fiat Cronos by following some simple steps: First, purchase a new air filter …
How to Replace the Cabin Air Filter on the Fiat Cronos
How to Replace the Cabin Air Filter on the Fiat Cronos
Fiat Cronos (2018-2026 / 358s, X6S) To replace the cabin air filter on this vehicle yourself, follow the simple instructions provided below and in the video. First, access the cabin fro…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos