Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Dashboard Bulbs in a Fiat Punto

Model: Fiat Punto Grandepunto , Punto EVO, MK 3, 199 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Interior dome light bulb

See other generations:
Video tutorial

Before you start, sit in the driver's seat of your Fiat Punto. Using two extraction keys, begin by pulling the radio out of its housing.

Once extracted, disconnect the rear connectors, and you will have removed the radio. This will give you access to the screws securing the radio frame, which you need to remove, then extract the frame itself.

At this point, you can simply pull out the air conditioning controls, and you will have reached the blown bulbs. To remove them, simply pull them out, and you will have completed the disassembly.

To fit the new bulbs and close everything up, simply follow these steps in reverse, and you will have completed the replacement.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Fiat Punto (1999-2011 / MK 2, 188) Are the bulbs for the air vents blown? Let's see how to disassemble them on a Fiat Punto. Remove the dashboard trim of the air conditioning controls …
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, you will see how to remove the instrument panel of a third-generation Fiat Punto. First, get inside the vehicle and start by …
Fiat Punto (2005-2018 / Grandepunto , Punto EVO, MK 3, 199) Do you want to remove the air knobs from the Punto to replace the bulbs? Let's see how to dismantle them from inside the central dashboard. First, re…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos