Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Dashboard of a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Instrument cluster

In this video tutorial, you will see how to remove the instrument panel of a third-generation Fiat Punto. First, get inside the vehicle and start by unscrewing the four side screws with an Allen key. Then, remove the ashtray and pull firmly to detach the plastic panel. The video also shows how to remove the bulbs from the switch panel: use pliers to pull out the old bulbs and replace them with new ones. At this point, reassemble the panel and replace the screws and the ashtray, as demonstrated in the video!

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Control Panel on a Fiat Punto
How to Remove the Air Control Panel on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) How to remove the air control panel located on the centre console of a Fiat Punto? Follow this guide: remove the lower part of the centre tunnel, tak…
How to Open the Dashboard of a Fiat Punto
How to Open the Dashboard of a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Need to perform maintenance inside the dashboard of a Fiat Punto? Here’s how to disassemble it. Unscrew the fastening screws located at the sides of …
How to Replace the Window Switch on the Fiat Grande Punto
How to Replace the Window Switch on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will see how to remove and replace the window switch on the Fiat Grande Punto, as well as on the Punto Evo, in simple ste…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos