Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster on a Fiat Punto Evo

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Instrument cluster

How to remove the instrument cluster on a Fiat Punto Evo? Follow these steps: Remove the screws from the plastic covers around the steering wheel using a screwdriver, then take off the trim from the instrument cluster. Unscrew the securing screws of the instrument cluster (perimeter) with a screwdriver; after removing the screws, pull the unit out from the dashboard and disconnect the power cable located at the back of the instrument cluster. Fit a new unit or replace the LEDs/bulbs in the existing one, then reassemble it. Finally, reverse the assembly steps.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster of the Fiat Punto Evo
How to Remove the Instrument Cluster of the Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Here are step-by-step instructions to remove and replace the instrument cluster of the Fiat Punto Evo, as well as the Grande Punto. First, get inside…
How to Remove the Instrument Cluster of a Fiat Punto Evo
How to Remove the Instrument Cluster of a Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Removing the instrument cluster in this model (similar to all Fiat models) is extremely simple. Before starting this operation, adjust the steering w…
How to Restore the Functionality of the Instrument Cluster in the Fiat Grande Punto
How to Restore the Functionality of the Instrument Cluster in the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video, restore the correct functionality of the instrument cluster in the Fiat Grande Punto. This tutorial also applies to the later Punto…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos