Do it yourself
Frequently asked questions about cars and motorcycles

How to Restore the Functionality of the Instrument Cluster in the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fuse box

See other generations:
Video tutorial

In today's video, restore the correct functionality of the instrument cluster in the Fiat Grande Punto. This tutorial also applies to the later Punto Evo and Punto models.

First, open the driver's side door and locate the glove compartment positioned at the bottom of the steering column. Once done, proceed by opening it and disconnecting the power connector.

You can then remove the grey 5 amp fuse, as shown in the video. At this point, reconnect the connector and close it, then test the correct functionality of the cluster.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before starting, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrument panel by turning the key in the ignition swit…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrumentation by turning the key in the ignition swit…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today, learn how to remove the car radio from a Fiat Grande Punto (199). This operation is really simple; you just need to have the radio release key…

    Frequently Asked Questions

    • Punto 1999-2011 - Where is the fuse of the reversing light of the Fiat Punto located? Read answer
    • Punto 2005-2018 - Where is the fuel pump relay located in the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - Where is the air conditioning fuse on Fiat Grande Punto? Read answer
    • Punto 2005-2018 - Where is the Fiat Grande Punto turn signal relay located? Read answer

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos