Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the gear lever knob in the Fiat Punto.

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years 2005-2018
Part: Shift knob

Let's start, as usual, when it comes to carrying out a maintenance operation to be carried out on a car, placing our Fiat Punto, in a stable and safe position, on a surface (well immobilized) or on the bridge, so that we can work on it, safeguarding the operator's safety. The operation to be performed is very simple. Just grab the knob of the gear lever and squeeze it firmly to do so, so rotate it counterclockwise and unscrew it from the thread located at the top of the gear lever. In this way, we can remove the knob and, if necessary, replace it with a new one.

Posted on 1 February 2021 by ScegliAuto

Video tutorial

Related tutorials

How to change the gear knob of a Fiat Punto.
How to change the gear knob of a Fiat Punto.
Fiat Punto (1999-2011 / MK 2, 188) In today's video tutorial, we will see how to disassemble and replace the gear knob of the Fiat Punto, following the instructions below. First, we ge…
Disassembly of the gear knob of the Fiat Grande Punto
Disassembly of the gear knob of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video tutorial we will see how to remove and replace the gear knob on the Fiat Grande Punto, but also on the Punto Evo. First of all, let'…
How to Replace the Gear Knob of the Fiat Punto
How to Replace the Gear Knob of the Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Start the process by unscrewing the knob at the top of the gear lever in your vehicle. After rotating the knob sufficiently around the lever, you can…

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos