Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the External Rear-View Mirror from a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Side mirror

Before you begin, open the front door of your Fiat Panda. Using a thin but sturdy tool as a lever, start by prying off and removing the internal cover near the rear-view mirror. This will expose the ring that secures the mirror to the door and the relevant electrical connectors. Proceed to unscrew and remove this ring, then disconnect the electrical plugs. Once you have completed this step, you can extract and remove the external rear-view mirror from your Fiat Panda, successfully completing the disassembly.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Panda (2003-2012 / 169, MK 2) Open the front door of your Fiat Panda. Begin by unclipping and removing the internal cover near the wing mirror. Next, unscrew and remove the nut th…
Fiat Panda (2012-2026 / 319, MK 3) Remove the internal trim panel of the wing mirror on the driver's side of a Fiat Panda using a trim removal tool (there are plastic clips). Unscrew t…
Fiat Panda (2012-2026 / 319, MK 3) In this brief guide, you will learn how to remove and replace the external wing mirror on a Fiat Panda. First, open the driver's side front door and …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos