Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb on a Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Headlight bulb

Lift the bonnet and place the support rod in position. Remove the round rear cover by unscrewing it slightly. Gently pull the connector from its housing, lift the tab, and detach the bulb from it. Insert the new bulb you have purchased (the video shows a suitable and compatible bulb) into the connector, place it back in position, and ensure it is correctly seated. Refit the rear cover and start the car to check that the bulb works. As you can see, this is a really simple and quick operation. Good luck!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlamp Bulb on Fiat 500
Replacing Headlamp Bulb on Fiat 500
Fiat 500 (2007-2024 / 312) Are the bulbs in the headlamp of your Fiat 500 blown? Here's how to change them. Open the front bonnet by pulling the lever located at the bottom rig…
How to Replace the Front Headlamp Bulb on a Fiat 500?
How to Replace the Front Headlamp Bulb on a Fiat 500?
Fiat 500 (2007-2022 / ) To replace the front headlamp bulb on a Fiat 500, open the bonnet to access the screws securing the headlamp from the top. You may also need to detac…
Replacing Bulb on Fiat 500
Replacing Bulb on Fiat 500
Fiat 500 (2007-2021 / 312) Replace the headlamp bulb on a Fiat 500. Lift the bonnet and secure it. Remove the cover cap behind the front headlamp. After removing the covers, di…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos