Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Headlamp Bulb on Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

Are the bulbs in the headlamp of your Fiat 500 blown? Here's how to change them. Open the front bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap of the headlamp (at the rear of the headlamp) and remove it. You will find the bulbs with metal clips; pull the bulb holder out of the headlamp and extract the damaged bulb using a screwdriver.

Fit the new bulb (ensure it is the correct type and size) and insert the bulb holder back into the headlamp housing. Refit the headlamp cover caps on the Fiat 500.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
Replacing Bulb on Fiat 500
Replacing Bulb on Fiat 500
Fiat 500 (2007-2021 / 312) Replace the headlamp bulb on a Fiat 500. Lift the bonnet and secure it. Remove the cover cap behind the front headlamp. After removing the covers, di…
How to Replace the Rear Light Bulb in a Fiat 500 L
How to Replace the Rear Light Bulb in a Fiat 500 L
Fiat 500 (2012-2023 / 500 L) Open the boot of the Fiat 500 L to replace the rear light bulb. Remove the internal side plastic cover of the light to disconnect the connector and u…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos