Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove Roof Lining on Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012

The method to remove the roof lining is similar for all cars. Remove the two front sun visors and the three handles inside the vehicle, above the window, by unscrewing the respective screws. Next, repeat by removing the cover that supports the seatbelt for the lower third passenger: you will find it approximately above the headrest of the right seat. To remove the plastic trims of the pillars, simply open the doors, remove the rubber, and lever with a flat screwdriver. To remove the seatbelts, just remove the upper bolt. Once the roof lining is free from everything, unscrew the two upper pins and pull it out from the rear side of the car.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlining of the Fiat Panda?
How to Replace the Headlining of the Fiat Panda?
Fiat Panda (1980-2003 / 141, MK 1) To replace the headlining of the Fiat Panda, first loosen the screws securing the handles above the doors so they can be completely removed. Next, lo…
How to install roof racks on a Fiat Panda
How to install roof racks on a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) In this guide we will see the steps that will allow us to install the roof racks on the Fiat Panda. First of all, open the rear door of the trunk and…
How to Remove the Interior Light on Fiat Panda
How to Remove the Interior Light on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Learn how to remove the interior light on a Fiat Panda: use a screwdriver or a plastic lever to pry between the light cover and the light itself (wit…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos