Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Pickup on the Fiat Ducato?

Model: Fiat Ducato X250 - Years 2006-2014
Part: Checks and maintenance

To fit the pickup on the Fiat Ducato, you need to go inside the cabin and remove the inspection hatch located in front of the driver's seat. Beneath it, you will find the float secured by some bolts: once these bolts are removed, gently pull the piece upwards to prevent the springs from holding it in place. Once the float is extracted, you can insert the pickup following the instructions shown in the tutorial. When the pickup is in place, the float can be reinserted into its slot and covered with the inspection hatch.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on the Fiat Ducato
How to Replace the Fuel Pump on the Fiat Ducato
Fiat Ducato (1993-2016 / MK 2) In this video tutorial, you will see how to remove and replace the fuel pump on the Fiat Ducato. First, open the side doors to access the cabin and r…
How to Remove the Thermostat from a Fiat Ducato
How to Remove the Thermostat from a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before you begin, open the bonnet of your Fiat Ducato. The thermostat is located near the bottom side of the cylinder head. Start by loosening and re…
Removing the Exterior Mirror on Fiat Ducato
Removing the Exterior Mirror on Fiat Ducato
Fiat Ducato (2002-2006 / ) Is the mirror on your Fiat Ducato damaged? Here’s how to remove it from the vehicle. Pry between the edge of the mirror frame and the mirror glass. C…

    Frequently Asked Questions

    • Ducato 1993-2016 - Where to find the ignition lock diagram of the Fiat Ducato 1.9 Td? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos