Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat of a Fiat Panda

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Seat

Start by opening the door of your Fiat Panda. Then push the seat back to the end of the rail travel, and move the carpet underneath. This will expose the bolts that secure the seat base to the floor, which you will need to unscrew and remove. Next, unlock the side latch of the rail using a large screwdriver and a hammer. Once this process is complete, push the seat base backwards. After doing this, you can remove the seat from the car, completing the disassembly.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Seat on a Fiat Panda
How to Remove the Front Seat on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the front seat on a Fiat Panda? In this video, you will learn how to proceed. First, move the seat forward (using the electric buttons …
How to Dismantle the Front Seat of a Fiat Panda
How to Dismantle the Front Seat of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Learn how to dismantle the front seat of a Fiat Panda after removing it from the cabin. In this video, the procedure is explained: use a screwdriver …
How to Remove the Front Seat of a Fiat Panda?
How to Remove the Front Seat of a Fiat Panda?
Fiat Panda (1980-2003 / 141, MK 1) Before you can start, open the front door of your Fiat Panda. Begin by sliding the front seat all the way back. Next, move the lower carpet you have …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos