Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Instrument Cluster Display on a Fiat 500

Model: Fiat 500 312 - Years 2007-2021

Today, learn how to remove and replace the display of the instrument cluster on a Fiat 500 in simple steps. First, remove the plastic covers and unscrew the fixing screws to take off the instrument cluster; then disconnect the electrical connector at the back. Next, unscrew the screws of the cluster to access the electronic board and the display; press the rear tabs to gently release the display, as shown in the video, disconnecting the electrical cable. Finally, replace it with the new one, following the video to the end!

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset Tyres on Fiat 500
Reset Tyres on Fiat 500
Fiat 500 (2012-2023 / 500 L) Reset tyres on a Fiat 500? Here's how to reset the warning light. Turn on the instrument cluster of the Fiat 500 with the key, then switch on the ins…
Removing the Instrument Cluster of the Fiat 500 X
Removing the Instrument Cluster of the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) In this video, learn how to remove the instrument cluster and the dashboard cover of the Fiat 500 X, following the instructions below. First, get ins…
How to Reset Service Light on Fiat 500
How to Reset Service Light on Fiat 500
Fiat 500 (2007-2021 / 312) How to reset the maintenance light on a Fiat 500? Check how to reset the light from above the instrument cluster. Enter the cabin and turn on the ins…

    Frequently Asked Questions

    • 500 2007-2022 - Where is the USB port fuse located on a Fiat 500? Read answer
    • 500 2007-2024 - What happens when the "uconnect" on Fiat 500 expires? Read answer
    • 500 2007-2024 - Where is the jack on the Fiat 500? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos