Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Bulbs on Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Tail light bulb

Open and lift the boot lid and unscrew the two bolts securing the affected headlamp using a star screwdriver. That's it! This will be enough to free the headlamp. Now, while extracting it from its housing, disconnect the connector. Once done and with the headlamp free, unscrew the two rear bolts holding the bulb holder. At this point, you can remove any affected bulb. Screw in and insert the new bulb and proceed in reverse order until fully reassembled, reattaching the headlamp to the bodywork.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Bulbs on a Fiat Grande Punto
Replacing the Bulbs on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Replace the bulbs on a Fiat Grande Punto. Open the bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the p…
Replacing Bulbs on Fiat Grande Punto
Replacing Bulbs on Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the bulbs on a Fiat Grande Punto: open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate …
Replacing the Headlight Bulbs on a Fiat Grande Punto
Replacing the Headlight Bulbs on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Replacing the bulbs in the rear light of your Fiat Grande Punto? Follow this guide to replace the damaged bulbs. Open the boot lid, and using a screw…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos