Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Oil and Oil Filter on a Fiat Punto Evo India

Model: Fiat Punto Evo India MK 1 - Years: 2014, 2015, 2016, 2017, 2018
Part: Engine oil

Video tutorial

To perform the oil and oil filter change on your vehicle, follow these instructions: Open the hood and lift the car. Open the oil fill cap. Go underneath the vehicle and remove the oil drain plug after placing a pan to catch the used oil. Wait a few minutes for all the oil to drain out, then reinstall the plug.

Go back to the engine compartment and locate the oil filter cap at the front of the engine.

Use a socket wrench to remove the cap and gain access to the filter. Remove the filter and replace it with the new one, also replacing the o-ring gasket.

Reinstall the filter cap and proceed to refill the system with new oil.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to Perform a Complete Service on the Fiat Punto Evo India
How to Perform a Complete Service on the Fiat Punto Evo India
Fiat Punto Evo India (2014-2018 / MK 1) In this video tutorial, you will learn how to perform a complete maintenance service by replacing the engine oil, oil filter, air filter, and coolant…
How to Perform the Routine Maintenance Service on the Fiat Punto Evo India 1.3 MultiJet
How to Perform the Routine Maintenance Service on the Fiat Punto Evo India 1.3 MultiJet
Fiat Punto Evo India (2014-2018 / MK 1) Today, let's see how to perform the routine maintenance service by replacing the engine oil, oil filter, and air filter on the Fiat Punto Evo India w…
How to Replace the Air Filter on the Fiat Punto Evo India
How to Replace the Air Filter on the Fiat Punto Evo India
Fiat Punto Evo India (2014-2018 / MK 1) In this new guide dedicated to the Fiat Punto Evo India, discover how to properly replace one of the most important components in the engine compartm…

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos