Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rubber that supports the muffler in the Fiat Punto 188?

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Exhaust muffler

After many years of use it may happen that the rubber that supports the muffler and which dampens the stresses wears out. In these cases it can be quickly replaced with a new spare, in this tutorial we can see how to proceed in the Fiat Punto 188. Let's start by removing the old rubber from the supports, clean the pins in which it was anchored thoroughly, certainly full of exhaust residues. We take the spare part and lubricate the fixing holes, anchor it well to the support and then fix the drain to it, making sure that all the pins are perfectly inserted.

Posted on 29 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the muffler on Fiat Punto
How to replace the muffler on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) How to replace the muffler of our Fiat Punto? We lift the car on a jack to carry out the disassembly of the muffler. Unscrew the locking pins of the …
Disassembly of the Punto silencer
Disassembly of the Punto silencer
Fiat Punto (1999-2011 / MK 2, 188) Let's see how the muffler is removed from under the floor of the Fiat Punto car. We jack up the car to access under the car bed and disassemble the d…
Replace the muffler of the Fiat Grande Punto
Replace the muffler of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this tutorial we will see the main steps that will allow us to remove and replace the muffler terminal of the Fiat Grande Punto, but also of the P…

How to Replace the Number Plate Bulb on Citroen C3

To replace the number plate bulb on a Citroen C3, use a screwdriver or plastic lever to remove the light cover (plastic housing) located in the rear bumper of the car. Once the light cover is removed, extract the bulb holder (using your hands), then disconnect the bulb from it. Fit the new LED bulb (same size and voltage) into the holder, then refit the light cover into the tailgate metal by pressing until the clips lock automatically. Test the correct operation of the previously installed bulb.

Watch the video!


by ScegliAuto

More videos