Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Disassembly of the Punto silencer

Fiat Punto - Video tutorial

Model: Fiat Punto 188, MK 2 - Years 1999-2011
Part: Muffler
Operation: Disassembly of the Punto silencer

Let's see how the muffler is removed from under the floor of the Fiat Punto car. We jack up the car to access under the car bed and disassemble the damaged piece. We unscrew the locking pins located on the sides of the silencer (muffler). Once all the fastening screws have been removed, we remove all the pieces from under the floor of the car. We clean the exhaust fitting before fitting the new muffler. We connect the muffler pipe and fix it under the car floor: we tighten the clamping screws to finish. We start the vehicle and test its operation.


Posted on 17 February 2024 by ScegliAuto



Replace the muffler of the Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In this tutorial we will see the main steps that will allow us to remove and replace the muffler terminal of the Fiat Grande Punto, but also of the P
Disassembly of the Fiat Punto steering wheel airbag
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Today we will see how to remove the steering wheel airbag on a Fiat Grande Punto and Punto Evo, following these simple and quick steps. First we get
How to remove the starter motor of a Fiat Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Before starting, we will have to go and open the front hood of our Fiat Punto. So let's start by removing the top engine cover, thus reaching the sta

    Frequently Asked Questions

    • Punto 1999-2011 - How much does it cost to replace the Fiat Punto muffler? Read Answer
    • Punto 1993-1999 - How to replace the muffler on the Fiat Punto? Read Answer
    • Punto 1999-2011 - How much does the Fiat Punto muffler cost? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos