Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Removal of the radiator of the passenger compartment heating of the Fiat Punto

Fiat Punto - Video tutorial

Model: Fiat Punto MK 3, 199, Punto EVO, Grandepunto - Years 2005-2018
Part: Passenger compartment heating radiator
Operation: Removal of the radiator of the passenger compartment heating of the Fiat Punto

In this guide we will see the main steps that will allow us to disassemble and replace the passenger compartment heating radiator of the Fiat Grande Punto, but also of the Punto Evo. Before disassembling the heating radiator, it is necessary to remove its pipe, in particular so as to drain the heat exchanger fluid; then we remove the bulkhead that we find at the bottom right, on the driver's side, then disconnecting the radiator pipes. Once the screws of the pipe clamps have been unscrewed, it will be possible to remove the heating radiator, replacing it with the new one!


Posted on 25 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Punto 1999-2011 - Why doesn't the heating in my Fiat Punto no longer work? Read Answer
    • Punto 1999-2011 - Why doesn't the heating in the Fiat Punto 2nd series (188) work? Read Answer
    • Punto 2005-2018 - Where is the stove radiator located in the Fiat Grande Punto? Read Answer
    • Punto 2005-2018 - Why does the water in the passenger compartment heating radiator not heat up in the Fiat Punto Evo? Read Answer
    • Punto 2005-2018 - Where is the heating radiator of a Fiat Grande Punto 1.4 located? Read Answer

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos