Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Exhaust muffler

See other generations:
Video tutorial

How to replace the exhaust on your Fiat Punto? Lift the car on a jack to remove the exhaust. Use a socket to unscrew the securing bolts of the exhaust pipe, and detach the metal clamp connecting the two pieces (as shown in the video).

Remove the exhaust from under the car. Fit the new exhaust under the car and tighten the securing screws. Lower the car, enter the vehicle, and reset the service light with a diagnostic tool (if illuminated).

Once all checks are completed, disconnect the tester from the connector. Start the car and check its operation.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

Replacing the Exhaust Silencer of the Fiat Grande Punto
Replacing the Exhaust Silencer of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this tutorial, we will cover the main steps to remove and replace the exhaust terminal of the Fiat Grande Punto, as well as the Punto Evo. First, …
How to Replace the Exhaust Mounting Rubber on the Fiat Punto 188?
How to Replace the Exhaust Mounting Rubber on the Fiat Punto 188?
Fiat Punto (1999-2011 / MK 2, 188) After many years of use, the rubber that supports the exhaust and dampens vibrations may wear out. In these cases, it can be quickly replaced with a …
Removing the Silencer from the Punto
Removing the Silencer from the Punto
Fiat Punto (1999-2011 / MK 2, 188) Let’s see how to remove the exhaust from under the floor of the Fiat Punto. Lift the car with a jack to access under the floor and remove the damaged…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos