Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the sidelights in Fiat 500E?

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: Headlight bulb
Operation: How to replace the sidelights in Fiat 500E?

In this tutorial we can see how to replace the position light bulbs in the Fiat 500E, an extremely simple and fast operation. First of all, let's make sure that the key is not inserted in order to operate in complete safety, then turn the wheel of the side in which we are going to work inwards. Once this is done, we open the small door located in the front part of the wheel arch and remove the large circular cap to access the bulb. To remove it from the housing, it will be sufficient to turn it slightly counterclockwise. Once this is done, we reposition both doors.


Posted on 23 May 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2007-2021 - Where are the front fog lights of the Fiat 500 mounted? Read Answer
    • 500 2012-2023 - Which dipped beam bulbs are fitted on the Fiat 500L? Read Answer
    • 500 2007-2022 - Why are the daytime running lights of the Fiat 500 not working? Read Answer
    • 500 2007-2021 - The position lights of my Fiat 500 are not working, what can I do? Read Answer
    • 500 1957-1975 - How to replace the headlight bulb in the vintage Fiat 500L? Read Answer
    • 500 1957-1975 - How to replace the headlight bulb on a Fiat 500? Read Answer
    • 500 2012-2023 - How to replace the parking light on a Fiat 500X? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos