Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear view mirror on the Fiat Argo?

Model: Fiat Argo MK 1 - Years 2017-2024
Part: Side mirror

To be able to replace the rear-view mirror cap on the Fiat Argo, it is necessary to pry the part between the mirror glass and the cap. In this way the glass part can be removed and it will be possible to access the screws in its rear part: these screws must be loosened to detach the cover from the relative mirror. Once the old cap has therefore been removed, it will be possible to insert the new one, fixing it with the appropriate screws. Finally, the glass of the mirror removed previously can be fixed again.

Posted on 2 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and replace the external rearview mirror of the Fiat Argo.
How to disassemble and replace the external rearview mirror of the Fiat Argo.
Fiat Argo (2017-2024 / MK 1) In a few simple steps, we will see the process of how to disassemble and replace the external rearview mirror of the Fiat Argo. First, we open the fr…
How do you deactivate the Start&Stop of the Fiat Argo?
How do you deactivate the Start&Stop of the Fiat Argo?
Fiat Argo (2017-2024 / MK 1) To deactivate the Start&Stop function of the Fiat Argo, you need to completely remove the dashboard panel located just below the steering column. Onc…
How do you reset the Service light on the Fiat Argo?
How do you reset the Service light on the Fiat Argo?
Fiat Argo (2017-2024 / MK 1) In order to reset the Service light of the Fiat Argo, you need to insert the key into the ignition switch, turn it to turn on the instrument panel: o…

How to Replace the Number Plate Bulb on Citroen C3

To replace the number plate bulb on a Citroen C3, use a screwdriver or plastic lever to remove the light cover (plastic housing) located in the rear bumper of the car. Once the light cover is removed, extract the bulb holder (using your hands), then disconnect the bulb from it. Fit the new LED bulb (same size and voltage) into the holder, then refit the light cover into the tailgate metal by pressing until the clips lock automatically. Test the correct operation of the previously installed bulb.

Watch the video!


by ScegliAuto

More videos