Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Fiat Fullback

Model: Fiat Fiat Various
Part: Service warning light

Video tutorial

To reset the service light on the Fiat Fullback, start by turning on the instrument panel and noting that the spanner light is illuminated; now turn off the panel, press the button located on the right side of the instrument panel (below the odometer) three times until the spanner with dashes appears, hold it until the spanner starts to flash, press it again after a minute if the "clear" message has not appeared; once the "clear" message appears, the new mileage (when to perform the service) will show; remove the keys from the dashboard, reinsert them, turn on the instrument panel, and confirm that the spanner light is off, completing the operation.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

Fiat Fiat Various In today’s video, we will see how to reset the service warning on the Fiat Fullback (this also applies to its twin, the Mitsubishi L200). Start the o…
Fiat Fiat Various To reset the Service light on the Fiat Egea, insert the ignition key into the ignition and turn it to power on the instrument panel. Once the panel i…
Fiat Fiat Various To reset the Service light on the Fiat 124 Spider, turn on the instrument panel and navigate through the menu using the dial on the centre console. S…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Spare Wheel on a Citroen C4 Grand Picasso

Today, in this short and simple guide, follow the steps to remove the spare wheel from the floor and replace it with the flat one on a Citroen C4 Grand Picasso. First, open the boot's tailgate and start by removing the upper shelf; then use the supplied key to unscrew the spare wheel bolt to remove it, as shown in the video. At this point, lift the vehicle with the jack and unscrew the wheel bolts, replacing it with the spare; then secure it with the bolts, tightening them in a cross pattern!

Watch the video!


by ScegliAuto

More videos