Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part:

Resetting the tyre pressure light is not complicated; you can do it yourself after checking the pressure. First, have a tyre specialist check the tyre pressure, or do it yourself if you have a compressor. Once the issue is resolved and normal tyre pressure is restored, get in the car, secure it with the handbrake applied; turn on the ignition without starting the engine. Check if the pressure light remains on; if it does, use the button located to the left of the steering wheel marked SET; hold it until the reset is complete.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting Tyre Pressure Light on Fiat Tipo
Resetting Tyre Pressure Light on Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) .. In this video tutorial, we will see how to reset the tyre pressure light on a Fiat Tipo; before performing the reset operation, it is necessary.. …
How to Reset the "TPMS" Light on a Fiat Tipo
How to Reset the "TPMS" Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Before you start, check and, if necessary, adjust the pressure in the tyres, then sit in the driver's seat of your Fiat Tipo. Start the engine. Next,…
How to reset the tyre pressure warning light on a Fiat Tipo?
How to reset the tyre pressure warning light on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To reset the tyre pressure warning light on a Fiat Tipo, first inflate all the tyres to the recommended pressure value. The recommended pressure is w…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos