Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to replace the Fiat Punto interior light bulb?

Fiat Punto - Video tutorial

Model: Fiat Punto 188, MK 2 - Years 1999-2011
Part: Interior lights ceiling light bulb
Operation: How to replace the Fiat Punto interior light bulb?

In order to replace the internal light bulb of the Fiat Punto, it is necessary to pry the lower part of the ceiling light located in the upper part of the passenger compartment, so that it is extracted from its housing: after the ceiling light has been removed, it will have to be disconnected the connector and pry it up so that it can be opened. In this way the bulbs inside it can be extracted from their housing and replaced with a new spare part; after replacement, the ceiling light can be closed by connecting it to the connector and inserting it into its housing.


Posted on 2 October 2022 by ScegliAuto



How do you replace the bulb of the interior lights of the Fiat Grande Punto?
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In order to remove the interior light bulb of the Fiat Grande Punto, it will be necessary to use an object like a screwdriver to pry and detach the d
How to replace the ceiling light bulb on Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) The central interior light on your car no longer works? Let's see in this video how to replace the light bulb in the Fiat Grande Punto ceiling light.
How to replace the low beam bulb on Fiat Punto.
Fiat Punto (1999-2011 / 188, MK 2) To replace the low beam headlamp of the Fiat Punto, some precautions must be used; First we open the hood of the Fiat Punto. The space where we will

    Frequently Asked Questions

    • Punto 2005-2018 - How much does the Fiat Grande Punto luggage ceiling light cost? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos