Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the remote battery in a Fiat 500

Model: Fiat 500 312 - Years 2007-2022
Part: Key

Easily replace the battery in the Fiat 500 key. Press button A as shown in figure 1 of the video, and move the metal insert (the key itself) to the open position. This will reveal the screw, which we see in the video as "C", using a small flat screwdriver. This will remove a sort of drawer where the battery is housed (a CR2032, which can be obtained for a few pounds even at a newsagent) that we will replace, being careful to respect its polarity. Now, we can reinsert the battery drawer back into the key, tightening the screw we opened earlier on the closed lock. Operation complete.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of a Fiat 500 X
How to Replace the Key Battery of a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Replacing the remote battery is a simple and quick task for any car remote. The most commonly used battery model is the CR 2032, available online or …
How to Replace the Key Fob Battery on Fiat 500 E
How to Replace the Key Fob Battery on Fiat 500 E
Fiat 500 (2020-2026 / 500 E, 332) The following instructions will show you how to remove and replace the battery in the key fob for the Fiat 500 E. First, take your key fob and start …
How to Replace the Remote Battery of the Fiat 500?
How to Replace the Remote Battery of the Fiat 500?
Fiat 500 (2007-2024 / 312) You can replace the remote battery of the Fiat 500 by pressing the button on the top of the device: this will lift the key and allow you to locate th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos