Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Bulbs in the Fiat 500?

Model: Fiat 500 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial, we will see how to replace the brake light bulbs in the Fiat 500, a very simple and quick operation. To do this, in addition to the correct replacement bulbs, you will need a set of Allen keys.

First, ensure that the key is not in the ignition, then open the boot and unscrew the two fixing bolts of the light unit located on the inner edge. Once done, pull the light unit out from the bodywork, disconnect the connector, and unscrew the screws of the rear plate where the bulbs are located.

Finally, follow the reverse procedure to reassemble everything.


Updated on 19 June 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Light Bulbs in the Fiat 500?
How to Replace the Brake Light Bulbs in the Fiat 500?
Fiat 500 (2007-2022 / 312) .. In this tutorial, you will see how to replace the brake light bulbs in the Fiat 500, a very simple and quick operation. First, ensure.. …
How to Replace the Stop Switch on the Fiat 500?
How to Replace the Stop Switch on the Fiat 500?
Fiat 500 (2007-2022 / 312) In this tutorial, you will see how to replace the stop switch on the Fiat 500, a very simple and quick operation. The failure of this device is often…
How to Fix the Third Brake Light on the Fiat 500
How to Fix the Third Brake Light on the Fiat 500
Fiat 500 (2007-2024 / 312) Here’s how to change the bulb of the third brake light on a Fiat 500: Open the tailgate, locate the two plastic caps on the inner trim near the third…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How many reversing lights are there on the Fiat 500? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos