Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Bulbs in the Fiat 500?

Model: Fiat 500 312 - Years 2007-2022
Part: Tail light bulb

In this tutorial, you will see how to replace the brake light bulbs in the Fiat 500, a very simple and quick operation. First, ensure that the key is not inserted, then open the boot and unscrew the two screws located along the inner edge of the headlight in question. Next, grasp the headlight, pull it towards you, and separate it from the bodywork. At this point, you can open the rear plate and proceed with replacing the faulty bulb. For the third brake light, the procedure is very similar; simply remove the two indicated screws.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Stop Switch on the Fiat 500?
How to Replace the Stop Switch on the Fiat 500?
Fiat 500 (2007-2022 / 312) In this tutorial, you will see how to replace the stop switch on the Fiat 500, a very simple and quick operation. The failure of this device is often…
How to Replace the Front Position Bulbs on a Fiat 500
How to Replace the Front Position Bulbs on a Fiat 500
Fiat 500 (2007-2021 / 312) In today's tutorial video, you will learn how to remove and replace the front position bulbs, as well as the dipped beam bulb, on a Fiat 500. To acce…
How to Replace the Rear Light Bulbs on a Fiat 500
How to Replace the Rear Light Bulbs on a Fiat 500
Fiat 500 (2007-2024 / 312) How to replace the rear light bulbs on a Fiat 500? Let's see how to proceed with the replacement: first, open the boot, unscrew the screws next to th…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How many reversing lights are there on the Fiat 500? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos