Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel on a Fiat Punto?

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Door trim panel

Removing the rear door panel on a Fiat Punto is a straightforward and quick task. Start by entering the cabin, then disconnect the window winder knob, remove the two caps located on the handle, and unscrew the screws inside the holes. Once removed, insert a flat-head screwdriver, or preferably a plastic spatula, into the lower joint of the panel and unclip it along the entire perimeter. Finally, follow the reverse procedure to fit the replacement.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Door Panel on the Fiat Grande Punto
Removing the Rear Door Panel on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Discover in this video tutorial how to remove the rear door panel on the Fiat Grande Punto, as well as on the Punto Evo. First, open the rear door an…
Removing the Rear Door Panel on the Fiat Grande Punto
Removing the Rear Door Panel on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, you will see how to remove the rear door panel and how to solve the locking issue on the Fiat Grande Punto, as well as the Punto Evo. …
Removing the Rear Door Panel from a Fiat Grande Punto
Removing the Rear Door Panel from a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to remove the rear door panel from a Fiat Grande Punto. First, open the door and then remove the window ha…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos