Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulbs in the Fiat Stilo?

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Headlight bulb

In this tutorial, see how to replace the dipped beam bulbs in the Fiat Stilo. Before proceeding, ensure the key is not inserted for safety. Start by opening the bonnet. For the right side, unscrew the two screws securing the airbox and remove it. Next, open the cap at the back of the headlamp, disconnect the power connector, unclip the metal clip, and extract the bulb. To fit the replacement, simply follow the reverse procedure. For the opposite side, you will need to remove the battery.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlamp Bulb on the Fiat Stilo
Replacing the Front Headlamp Bulb on the Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) In this guide, we will discover the instructions that will allow you to remove and replace the front headlamp bulb on the Fiat Stilo. First, open the…
Replacing the Headlight Bulbs on Fiat Stilo
Replacing the Headlight Bulbs on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) How to replace the front headlight bulbs on Fiat Stilo? Start by lifting the front bonnet by pulling the lever located at the bottom right of the das…
How to Change the Front Headlight Bulb on a Fiat Stilo
How to Change the Front Headlight Bulb on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) To replace the front headlight bulbs on a Fiat Stilo, open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos