Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Restore the Mirror on a Fiat Ducato

Model: Fiat Ducato X250 - Years 2006-2014
Part: Side mirror

To restore the damaged external rear-view mirror on this vehicle, follow the instructions below and refer to the video tutorial. First, reposition the mirror support (motor) by making new pilot holes and using additional screws to secure it to the mirror. If the lower mirror is not broken, reposition it in its seat. Next, replace the cracked upper glass with an equivalent model that has the same specifications. If the motor is not damaged, disconnect the rear connector of the old mirror and connect it to the new one, then proceed with its installation.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Exterior Mirror on Fiat Ducato
Removing the Exterior Mirror on Fiat Ducato
Fiat Ducato (2002-2006 / ) Is the mirror on your Fiat Ducato damaged? Here’s how to remove it from the vehicle. Pry between the edge of the mirror frame and the mirror glass. C…
Replacing the Mirror on a Fiat Ducato
Replacing the Mirror on a Fiat Ducato
Fiat Ducato (2002-2006 / ) This video demonstrates how to replace the external mirror on a Fiat Ducato. Use a plastic-coated lever to pry between the perimeter of the mirror fr…
How to Remove the Right Side Mirror on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before starting, exit the cabin of your Fiat Ducato and head to the right side mirror. Begin by pushing on the upper section of the larger mirror. Th…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos