Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Cronos
    4. : How to mount a rear spoiler on the Fiat Cronos

Fiat Cronos - Video tutorial

Model: Fiat Cronos 358s, X6S - Years 2018-2024
Part: Bodywork
Operation: How to mount a rear spoiler on the Fiat Cronos

If we intend to customize our car by installing an additional rear spoiler, we can follow the instructions given in this video and in the description below. Once a spoiler has been purchased after market 1 that is compatible with this type of car, first of all proceed to carefully clean and degrease the part of the bodywork on which we are going to apply the spoiler. First fix the right-hand side terminal which is adhesive to the bodywork and then insert the spoiler which we will also fix with the adhesive. And finally we will go to position the opposite terminal always first removing the protective film of the adhesive.


Posted on 26 April 2023 by ScegliAuto



How to replace the rear headlight bulb of the Fiat Cronos.
Fiat Cronos (2018-2024 / 358s, X6S) Let's see in this guide how to disassemble and replace the rear light bulb (the one on the trunk door) of the Fiat Cronos. First of all, we open the
How do you remove the door panel of the Fiat Cronos?
Fiat Cronos (2018-2024 / 358s, X6S) In order to remove the door panel of the Fiat Cronos, you need to detach the molding located near the internal handle: under this molding, there will
How to replace the Fiat Cronos interior ceiling light
Fiat Cronos (2018-2024 / 358s, X6S) Let's see in this guide how to remove and replace the internal light bulb of the Fiat Cronos passenger compartment, following the instructions below.

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos