Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Extract the Transponder from a Fiat Linea Key?

Model: Fiat Linea MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

Video tutorial

Extracting the transponder will inevitably damage the key shell of your car, so this operation should only be performed if you intend to permanently transfer the transponder to another key. To extract it, use a utility knife to score around the entire edge of the key. This allows you to open the outer shell, revealing the core of the key where the transponder is located.

It is near the outer part of the blade and can be removed with your fingers after pushing it outward.

Due to its small size, be very careful not to lose it.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

How to Set Up Bluetooth on the Fiat Linea?
How to Set Up Bluetooth on the Fiat Linea?
Fiat Linea (2007-2018 / MK 1) To connect your smartphone via Bluetooth to the Fiat Linea's radio, turn on the radio using the designated button after the instrument cluster is pow…
How to Replace the Timing Chain on the Fiat Linea?
How to Replace the Timing Chain on the Fiat Linea?
Fiat Linea (2007-2018 / MK 1) To replace the timing chain on the Fiat Linea, lift the car and loosen the bolts securing the right front wheel so that it can be removed along with …
How to Replace the Air Filter in a Fiat Linea?
How to Replace the Air Filter in a Fiat Linea?
Fiat Linea (2007-2018 / MK 1) As you can see in this tutorial, replacing the air filter in a Fiat Linea is an extremely simple and quick task. Before proceeding, to work safely, w…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos