Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Brake Shoes on a Fiat Grande Punto?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Checks and maintenance

The rear brake shoes wear out over time and will inevitably need replacing. This video outlines the step-by-step procedure to complete the job yourself. Before starting disassembly, lift the vehicle for easier access. Remove the wheel and disassemble the hub by unscrewing the pins for both, possibly using an air impact wrench. If necessary, use a screwdriver to lever, especially when extracting the hub. At this point, remove the locking forks of the shoes and before pulling them out, detach the oil pipe from them. The reverse procedure allows you to fit the new shoes and complete the job.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today, discover the steps to remove and replace the front brake pads on the Fiat Grande Punto, as well as the Punto Evo. First, lift the vehicle and …
Fiat Punto (1999-2011 / MK 2, 188) In this tutorial, you will see how to replace the rear brake shoes on a Fiat Punto, a simple operation that requires good manual skills. First, engag…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to adjust the handbrake on a Fiat Grande Punto by following the instructions below. First, get in the vehi…

    Frequently Asked Questions

    • Punto 2005-2018 - What problem does the Fiat Punto have with the "city mode"? Read answer
    • Punto 2005-2018 - How to bleed the Fiat Punto clutch pedal? Read answer
    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer
    • Punto 1999-2011 - How does the air conditioning of the Fiat Punto work? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos