Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Shoes on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Brake drums and shoes

See other generations:
Video tutorial

Below are the instructions for removing and replacing the rear brake shoes on a Fiat Punto. First, lift the vehicle at the rear and start by removing the wheel; then unscrew the central nut of the drum to remove it, as shown in the video.

At this point, detach the clips and springs of the shoes to remove them; clean the brake system of any residual dirt, then install the new original brake shoes. Finally, reassemble the drum and rear wheel!


Posted on 27 April 2026 by ScegliAuto


Related tutorials

How to Change the Rear Brake Shoes on a Fiat Grande Punto - Punto Evo
How to Change the Rear Brake Shoes on a Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to remove and replace the rear brake shoes on a Fiat Grande Punto, as well as on the Punto Evo. First, lif…
How to Replace the Rear Brake Shoes on a Fiat Punto?
How to Replace the Rear Brake Shoes on a Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) In this tutorial, you will see how to replace the rear brake shoes on a Fiat Punto, a simple operation that requires good manual skills. First, engag…
How to Replace the Rear Brake Shoes on a Fiat Grande Punto?
How to Replace the Rear Brake Shoes on a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) The rear brake shoes wear out over time and will inevitably need replacing. This video outlines the step-by-step procedure to complete the job yourse…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos