Do it yourself
| ||||
|
Fiat Punto - Video tutorial
Model: Fiat Punto
188, MK 2
- Years 1999-2011 The limited space available for the operation does not make the work easy, therefore it is necessary to remove the cover of the fuse box in order to easily remove the lamp. The first operation consists in releasing the bulb holder holding spring by moving it to the left. Carefully remove the bulb holder and to facilitate the operation completely remove the retaining hook. Unhook the lamp retaining hook and remove it completely taking care not to drop it. Remove the lamp from the socket. Refit the new lamp in the lamp holder paying attention to the reference notch in order to fit the lamp correctly. Be careful not to touch the lamp bulb with your hands. Carefully refit the lamp retaining hook and fit the assembly into the headlight checking that the hooks and gasket are in place correctly. Close the fuse cover.
Posted on 23 June 2023 by ScegliAuto
How to replace the low beam / high beam bulb on the Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) To replace the low beam / high beam bulb of the Fiat Grande Punto, we open the bonnet, go to the back of the headlight, remove the plastic cover, usi
How to mount the h4 leds on the Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) To install an h4 (low beam and high beam) led bulb on a Fiat Grande Punto, we start by removing the rear rubber cap of the headlight, disconnect the
Replace the headlight bulb on Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In this video we will see the step by step instructions to be able to remove and replace the dipped beam headlight bulb on a Fiat Grande Punto. First Other guides that may interest you
|
Frequently Asked QuestionsDisassembly of the gear knob on the Lancia Ypsilon 2Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.104
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |