Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Shell of a Fiat?

Model: Fiat Fiat Various
Part: Key

In this tutorial, you will see how to replace the remote shell of a Fiat, a very simple and quick operation. To do this, you will only need a small cross-head screwdriver, a flat-head screwdriver, and of course, the correct replacement part. First, remove both outer frames, then identify the two screws indicated, unscrew them, and by levering around the entire perimeter, separate the two halves of the remote. Next, remove both the internal module and the emergency metal key, transfer them into the replacement shell, and follow the reverse procedure.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Control Battery on a Fiat?
How to Replace the Remote Control Battery on a Fiat?
Fiat Fiat Various In today's video, you will see how to replace the casing of the remote control for Fiat models from the early 2000s. First, remove the manufacturer's…
How to replace the battery of the Fiat Grande Punto - Panda key remote control
How to replace the battery of the Fiat Grande Punto - Panda key remote control
Fiat Fiat Various These brief instructions will guide us through the process of disassembling and replacing the battery of the key remote on various Fiat models such a…
How to Open the Remote of a Fiat?
How to Open the Remote of a Fiat?
Fiat Fiat Various In this tutorial, see how to open the remote of a Fiat, a very simple and quick operation, for example, when you need to replace the battery. Start b…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos