Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Gear Knob on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Shift knob

If the gear knob comes off when changing gears, you need to find a solution to securely reattach it. The knob comes off because the seat of the rod wears down, creating play and allowing it to slip off. Therefore, you need to somehow thicken the seat of the rod by applying a sleeve. A quick and economical solution is to use the cap from insulin syringes, which has the right dimensions and elasticity to fit properly. Insert the spring, the cap that acts as a sleeve, and finally the knob.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Gear Gaiter on Fiat Panda
Replacing the Gear Gaiter on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Need to replace the gear gaiter on a Fiat Panda? Here’s how to remove the damaged gaiter from the top of the gear lever. Remove the gear knob from th…
How to Replace the Gear Knob of the Fiat Panda?
How to Replace the Gear Knob of the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the gear knob of the Fiat Panda, grip the old knob at the end of the lever and twist it slightly while pulling upwards. This will detach t…
Replacing the Gear Lever on a Fiat Panda
Replacing the Gear Lever on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this case, we have illustrated with a Fiat Panda, but replacing the gear lever is a similar procedure on almost all cars and is quite simple. The …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos