Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on a Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Shift knob

See other generations:
Video tutorial

To replace the gear knob on a Fiat Panda, simply unscrew the small screw that secures the knob to the end of the lever. Once this screw is loosened, you can pull the knob off by grasping it and pulling upwards.

After the old knob is removed from the gear lever, you can install a new one by placing it onto the end of the gear lever. Once positioned, secure it by tightening the screw located at the back of the knob.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, sit in the driver's seat of your Fiat Panda. It is strongly advised to perform this operation with the engine off, to avoid acc…
How to Replace the Gear Knob and Gaiter on the Fiat Panda
How to Replace the Gear Knob and Gaiter on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) This guide will show you the procedure for removing and replacing the gear knob and gaiter on the Fiat Panda. First, get inside the cabin and start b…
How to replace the gear knob and gear lever gaiter of the Fiat Panda
How to replace the gear knob and gear lever gaiter of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) We will briefly see the step-by-step instructions on how to disassemble and replace the knob and the gear lever boot of the Fiat Panda. First, we get…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos