Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Convergence Blue&Me Control Unit in the Fiat 500?

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Control unit

See other generations:
Video tutorial

In this tutorial, see how to replace the Convergence Blue&Me control unit in the Fiat 500. This is a simple operation but requires removing the left internal cover of the cabin. First, open the bonnet and disconnect the negative terminal of the battery.

Next, go to the rear, unscrew all the indicated bolts, and remove both the seat and the backrest of the sofa. Then, remove the left seatbelt, unclip the pillar cover, and separate the inner panel.

At this point, disconnect the control unit connector, remove it, and fit the replacement.


Updated on 3 September 2026 by ScegliAuto


Related tutorials

How to Use Blue&Me on a Fiat 500
How to Use Blue&Me on a Fiat 500
Fiat 500 (2007-2024 / 312) This guide shows you how to use Blue&Me on a Fiat 500. It's a very simple operation; enter the vehicle, connect a USB Memory Stick, MP3 player, or Sm…
Faulty Blue & Me Control Unit on a Fiat 500 with Mileage Flashing on the Dashboard
Faulty Blue & Me Control Unit on a Fiat 500 with Mileage Flashing on the Dashboard
Fiat 500 (2007-2024 / 312) In this video, we see the cause of the flashing mileage on the dashboard of a Fiat 500. Diagnosing with an OBD SCAN revealed error codes P0022 and U1…
Reset and Guide to Using the Blue & Me System in the Fiat 500
Reset and Guide to Using the Blue & Me System in the Fiat 500
Fiat 500 (2007-2022 / 312) In this guide, we will cover the main instructions that will allow you to reset the Blue & Me system in the Fiat 500. To reset the Bluetooth system, …

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - Where is the bluetooth control unit of the Fiat 500 located? Read answer
    • 500 2007-2024 - Ebd failure on Fiat 500, what does it mean? Read answer

How to Open the Bonnet of the Renault Kangoo

In this video, see how to open the bonnet of a Renault Kangoo and locate the windscreen washer fluid reservoir. The YouTuber had to go to a local garage to achieve this. He mentions going towards the passenger door, as this is a right-hand drive vehicle. Naturally, for left-hand drive vehicles, the door is that of the driver. Pull the lever located on the side towards you to release the bonnet. To open it, lever from the centre of the bonnet outwards, which is somewhat the opposite of how most bonnets open. In front of the driver, on the grille, there is a black rubber cap. Here you can add the washer fluid.

Watch the video!


by ScegliAuto

More videos