Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to replace the door panel on a Fiat Punto

Fiat Punto - Video tutorial

Model: Fiat Punto 188, MK 2 - Years 1999-2011
Part: Door panel
Operation: How to replace the door panel on a Fiat Punto

Open the door to be replaced and with a socket wrench remove the screws that are present along the edge of the handle, now you will have to remove the screws that are present along the lower edge of the door and also the screw on the lower right corner of the door. case, now remove the cap present in the middle of the door on the left edge and consequently also the screw under the cap, lift the triangle in correspondence with the mirror and now you will have to extract the free parts, now you just have to extract the door by pulling it towards you and disconnecting the plugs on the back.


Posted on 25 September 2023 by ScegliAuto



How to remove the Fiat Grande Punto door panel
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Let's see in this guide, the steps on how to remove and replace the front door panel of the Fiat Grande Punto, but also of the Punto Evo. First of al
Removing the rear door panel Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In this video tutorial we will see how to remove the rear door panel of a Fiat Grande Punto. First we open the door and then we go to remove the wind
Remove the rear door panel on the Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Let's find out in this video tutorial how to remove the rear door panel on the Fiat Grande Punto, but also on the Punto Evo. First of all, open the r

    Frequently Asked Questions

    • Punto 1999-2011 - How to remove the rear door panel in a Fiat Punto? Read Answer
    • Punto 2005-2018 - How to remove the rear door panel in the Fiat Grande Punto? Read Answer

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos