Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the rear speakers in the Fiat Grande Punto?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Speaker

It doesn't happen often, but it can happen that a voltage surge burns a speaker, or that over time and prolonged use, the membrane weakens and breaks. You can intervene independently and carry out the replacement, in fact the steps involved are presented in the video available here. Making sure that the diameter of the new speaker is the same as the one to be replaced, you proceed by unscrewing the locking screws from the door panel, pulling the speaker forward and disconnecting the rear electrical cables. For the installation of the new speaker, all you have to do is follow the reverse procedure.

Posted on 2 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing Speakers on the Fiat Grande Punto - Punto Evo
Replacing Speakers on the Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today, follow the instructions on how to remove and replace the front speakers on the Fiat Grande Punto, as well as the Punto Evo. First, open the fr…
Replacing the Speakers in the Fiat Grande Punto
Replacing the Speakers in the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this brief and simple guide, learn how to remove and replace the front speakers of the Fiat Grande Punto, as well as the Punto Evo. First, open th…
Replacing Speakers in a Fiat Grande Punto
Replacing Speakers in a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn the main steps to remove and replace the speakers in a Fiat Grande Punto. First, open the door and remove the …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos